scripts

Contents

Type Size Name Notes
text 918B README
shell script 17B llp_path
74B makesound.proc
shell script 808B mcclean satellite imagery cleanup program
95B mccrontabfile
shell script 724B mcfloat look at satellite loops
shell script 15B mcidas_path
shell script 585B mcloop look at satellite loops
108B mcstart
shell script 116B mctexmex satellite loop for texmex area
shell script 114B mcus satellite loop for United States
shell script 94B nwsmarksob
shell script 146B nwssavemxsob
shell script 287B nwssavesob
shell script 469B nwssavesound
shell script 1kB rafgps compute gps-corrected position and velocity Input file must be in the form of a Candis file reduced to 1 Hz and cdfcated into a single variable slice. Output file has gps-corrected winds, unew and vnew, and corrected longitudes and latitudes, lonnew and latnew. It also contains the correction fields, ufix, vfix, lonfix, and latfix.
shell script 1kB rafharp This script reads an Electra high rate GENPRO II data file from the HaRP experiment, extracts selected fields, and reduces everything to 1 Hz data. The input data must have been read using the Candis utility rtape. The Genpro header file must have been previously read and put on disk in a place accessable to you. However, since the data file is read from the standard input, it may be piped in directly from the rtape utility. The output file is a Candis file with one variable slice containing all the data for the flight as one-dimensional fields with tptime as the dimension. Note that if other than 1 Hz or 20 Hz data are retained in the cdfextr arguments, additional cdfrdims must be included in the pipe to reduce these fields to 1 Hz.
shell script 16B weather_path
shell script 986B wx
308B wxcrontabfile
shell script 662B wxdiv Shell script to compute horizontal divergence on a pressure level
shell script 643B wxdiv_b Shell script to compute horizontal divergence on a pressure level
shell script 930B wxipv shell script to make isentropic potential vorticity maps
shell script 891B wxipv_b shell script to make isentropic potential vorticity maps
shell script 590B wxlc plot current surface lightning data
shell script 274B wxllpaddr find pointer to current llp file
shell script 498B wxlm plot surface lightning data
shell script 763B wxmr shell script to make constant mixing ratio plot of pressure
shell script 745B wxmr_b shell script to make constant mixing ratio plot of pressure
shell script 352B wxocut take a cut of weather data at arbitrary angle
shell script 356B wxocut_b take a cut of weather data at arbitrary angle
shell script 1kB wxomega compute vertical pressure velocity in mb per day
shell script 225B wxparity extract parity report from surface data
shell script 332B wxpvcut take a cut of weather data at arbitrary angle -- plot pv & theta
shell script 337B wxpvcut_b take a cut of weather data at arbitrary angle -- plot pv & theta
shell script 861B wxpwat precipitable water calculation
shell script 178B wxs
shell script 1kB wxsm plot surface data
shell script 1kB wxsme plot surface data over extended area
shell script 2kB wxss plot surface data and satellite ir temps
2kB wxss.old
shell script 143B wxstart
shell script 298B wxtestnew This script tests the named file periodically to see if it has been updated. It beeps if it has.
makefile 95B wxtestnew.make
shell script 788B wxtrop plot pressure and potential temp at trop as defined by PV value
shell script 770B wxtrop_b plot pressure and potential temp at trop as defined by PV value
shell script 384B wxu
312B wxug make skew-T plots from gridded data
573B wxum plot upper air constant pressure maps
shell script 1kB wxummake make gridded data for wxum
shell script 1kB wxummake_b make gridded data for wxum